• Product Catalog > Fiber Optic Cable (Indoor)
  • About
  • Fiber optic cable (indoor) is composed of one or more fibers enclosed in protective coverings and strength members. Cable types can include simplex, duplex, multi-fiber, patch cord and ribbon fiber. Simplex cable is fiber optic cable with a single optical fiber. Duplex cable is fiber optic cable with two optical fibers. Multi-fiber cable is a fiber optic cable with several optical fibers. Patch cords are short length fiber optic cables with connectors.
    • Areas Related

    • Adcantage of Optical Fibers

      In the present time, we have ultra low loss fibres(0.001 dB/km) so that the optical signals can be transmitted through the fibre over a very long distances with low loss. Thus the optical fibres are dielectric waveguides which transmit the optical signals or data through them with a very low attenuation and very low dispersion. If we use soliton laser pulses one can transmit the signals almost without any loss or dispersion. Thus one can achieve very high band width or high data rate using fiber optic cables. Now a days, we have dispersion free and dispersion compensation fibers...

      The Secrets of Choosing Ribbon Fiber

      Do you know why it is so expensive to install Fiber To The Home? Why Bell companies are reluctant to deploy fiber optic network directly to consumers in a large scale?

      It's not the material cost. It's the labor! The introduction of fiber into the subscriber loop has increased the installation of short cable lengths with large number of splices. The speed at which the cables can be placed, spliced, accessed and reconfigured are becoming extremely important...

      Fiber Optic Patch Cord/ Pigtail

      Fiber optic patch cord is a fiber cable assembly that connects two ends terminated and ready for installation. There is another type of fiber cable assembly called a pigtail. It is a short optical fiber permanently attached to a source, detector, or other fiber optic device at one end and an optical connector at the other. Pigtails are particularly used for optical device connectivity. Common types of fiber optic patch cord include FC, LC, MT-RJ, MU, SC, and ST. Fiber applications for fiber optic connectors can be single mode or multi mode. Fiber types for fiber optic patch cord can include simplex, duplex, and multi-fiber. Maximum cable diameter and insertion loss are also important parameters to consider. Insertion loss is a measure of the attenuation of a device by determining the output of a system before and after the device is inserted into the system. For example, a patch cord causes insertion loss across the interconnection (in comparison to a continuous cable with no interconnection).